No products in the cart.
Return To Shop
Mitutoyo
Mitutoyo America Corporation was formed in 1963 and is headquartered in Aurora, Illinois (just outside of Chicago). Mitutoyo America offers the full product line of precision measuring tools, and hardness testers.
Mitutoyo Dial Caliper – Series 505
$282.27 Mitutoyo Dial Caliper – Series 505 0-12″ Caliper New designed dial movement for ultra smooth sliding and high shock protection. Can measure OD, ID, depth, and steps. Lock screw for dial bezel and for holding the slding jaw position . Models available with carbide-tipped OD and ID jaws. Supplied in fitted plastic case.
Mitutoyo Dial Depth Gage – Series 7200
$377.00 0-8″ Dial Depth Gage that is designed with a black plunger type dial indicator for upward facing readings.
Mitutoyo Digimatic Caliper – Series 500
$633.00 0-12″ Caliper Mitutoyo’s absolute Digimatic Caliper is the next generation of electronic calipers. It keeps track of its origin point once set. Whenever turned on, the large LCD displays the actual slider position ready to start measurement. No more repeated zero setting is necessary with the absolute encoder technology, as well as no more concern for over speed errors. Large and clear LCD readout. The ZERO/ABS key allows the display to be Zero-Set at any slider position along the scale for incremental comparison measurements. This switch will also allow return to the absolute (ABS) coordinate and display of the true...
Mitutoyo Digimatic Caliper – Series 551 with Nib Style Jaws
$1,417.00 0(.5)-20″ Caliper The rounded faces of the jaws are ideal for accurate ID (inside diameter) measurement. With SPC output. Supplied in fitted plastic holster in carton.18″/450mm and larger supplied wooden case.
Mitutoyo Digimatic Height Gage – Series 192
$2,848.00 0-24″ Digimatic Height Gage, Standard type with SPC Data Output • Switchable resolution (.0002”/0.005mm or.0005”/0.01mm) • Easy-to-use standard type. • Carbide-tipped scriber is provided. • Double-column structure ensures high measuring accuracy. • Coarse/fine feed switching. • Two preset reference heights. Function: Zero-setting, ABS/INC switching, Two presets,Probe tip diameter compensation-/+ switching, Power ON/OFF, Data hold, inch/mm conversion (on inch/mm models only) Alarm: Low voltage, Counting value composition error
Mitutoyo Inside Micrometer – Series 141 INTERCHANGEABLE TYPE
$247.00 2-12″ Interchangable Inside Micrometer Wide range of ID measurements with interchangeable rods. Each interchangeable rod is marked with its measuring range. The sizes of interchangeable rods can be adjusted with spacing collars. Both micrometer head and furnished rods are satin-chrome finished throughout.
Mitutoyo Micro Vickers Hardness Tester
Mitutoyo Micro Vickers Hardness Tester The Mitutoyo line of Vickers hardness testers offer best in class quality and accuracy from semi to fully automated performance. The electromagnetic force motor used in the loading mechanism enables the test force to be freely selected (see test force specifications) over the wide range of 0.4903mN to 19610mN (0.05gf to 2 kgf). It is also possible to freely set load dwell times. Now your desire for absolute control over the indentation size in Vickers hardness testing can be satisfied. The HM-200 series always offers the test force most appropriate for the specimen material and...
Mitutoyo Micrometer Series 128
$120.00 Mitutoyo Micrometer Series 128 0-1″ Micrometer 0-4mm measuring rod. With measuring rod clamp. With carbide-tipped measuring rod model is available. With ratchet stop for constant force.
Mitutoyo Outside Micrometers – Series 103
$221.00 – $250.00 Outside Micrometer Hammertone-green, baked-enamelfinished frame. Ratchet Stop or Friction Thimble for exact repetitive readings. With a standard bar except for 0-1″ model
Mitutoyo Rockwell Hardness Tester
Mitutoyo Rockwell Hardness Tester The new frame design allows the full 7.1 of specimen capacity without the need to cut a whole in the table. The machine is simple to operate; The digital HR320 model uses a flashing bar graph to indicate when the initial test force has been reached. 430 models feature automatic brake and automatic start function that prevents overloading and begins test cycle. The HR430 model also includes the dial a weight system for easier load selection. All models are complete with Flat and VEE anvils, diamond and 1/6 carbide ball indenters, 2 HRC and 1 HRBW...
Mitutoyo Standard Bore Gage – Series 511
$439.32 Mitutoyo Standard Bore Gage – Series 511 2-6″ Bore Gage Mitutoyo offers a complete selection of Bore Gages,all of them with interchangeable anvils and necessary accessories to perform close tolerance ID measurements. Carbide-tipped contact points for durability. The dial indicator is fully protected by a rugged cover. Optional extension rods can be attached for measuring deep holes.
Mitutoyo Tube Micrometer – Series 115
$151.00 0-1″ Tube Micrometer – Type C Designed to measure the wall thickness of various tubing. The Tube Micrometers have two combinations of measuring faces (carbidetipped): spherical-flat type, and spherical type. Cylindrical anvils (perpendicular) are also available. With Ratchet Stop for constant force. With SPC output (Series 395). With digit counter (Series 295). With a standard bar except 0-25mm and 0-1” model. Supplied in fitted plastic case.