Quickmount Fast Curing Epoxy Resin
Price range: $80.00 through $180.00
Fast Curing Epoxy Resin Has moderate hardness, low shrinkage, transparent. Cure time: 30-45 minutes. Similar to Beuhlers EpoQuick. DIRECTIONS FOR USE: -Mix 10-parts epoxy resin with 1-part by weight of epoxy hardener. -Blend mixture thoroughly. -Pour into mold immediately. -Allow to cure at room temperature. For larger amounts, external cooling may be required.
Transacrylic Mounting Powder
$97.00
If you would like to request a sample, click the button below, then choose which specific product sample to add to your cart. Transacrylic (Translucent) Mounting Powder, 5 Lb
Ultrathin Low Viscosity Hardener
Price range: $32.00 through $125.00
Low Viscosity Epoxy Resin Dries clear. Low viscosity for porous specimens. 45-60 minute cure. Ultrathin does not need heat to cure. However, heating does make it thinner and cure faster. Can be cured at room temperature and does not have the yellow color that some epoxys have. (Eg. Buehler’s EpoHeat.) When it cures it has no smell. This product is comparable to Beuhler’s EpoThin. DIRECTIONS FOR USE: -Mix 10-parts epoxy resin with 1-part by weight of epoxy hardener. -Blend mixture thoroughly. -Pour into mold immediately. -Allow to cure at room temperature. For larger amounts, external cooling may be required. Insufficient mixing...
Ultrathin Low Viscosity Resin
Price range: $60.00 through $205.00
Low Viscosity Epoxy Resin Dries clear. Low viscosity for porous specimens. 45-60 minute cure. Ultrathin does not need heat to cure. However, heating does make it thinner and cure faster. Can be cured at room temperature and does not have the yellow color that some epoxys have. (Eg. Buehler’s EpoHeat.) When it cures it has no smell. This product is comparable to Beuhler’s EpoThin. DIRECTIONS FOR USE: -Mix 10-parts epoxy resin with 1-part by weight of epoxy hardener. -Blend mixture thoroughly. -Pour into mold immediately. -Allow to cure at room temperature. For larger amounts, external cooling may be required. Insufficient mixing...