Ultrasonic Thickness Gauge

5-Year Warranty! Phase II hand held unit has precise touch and read capabilities yet is economically priced. The UTG-1500 is designed to measure the thickness of metallic and non-metallic materials such as aluminum, titanium, plastics, ceramics, glass and any other good ultrasonic wave conductor as long as it has parallel top and bottom surfaces. The UTG-1500 will accurately display readings in either inch or millimeter after a simple calibration to a known thickness or sound velocity. This is our most economical device!

Comes complete with Certificate of Calibration, Couplant Gel, AA Batteries, Operation Manual and Custom Carry Case.

Display Type3-digit LCD
Resolution0.001″ / 0.01mm
Measuring Range0.04″ to 8.0″
Sound Velocity Range3280-32805 ft/s ( 1000-9999 m/s )
Operating Temperature32-122 degrees F
Frequency5MHz
Update Range4Hz
MemoryN/A
OutputN/A
PrintingN/A
Power SupplyAA alkaline batteries (4pc supplied)
Battery LifeApprox. 250 hours/set
Power ConsumptionWorking current is less than 3V
Dimensions4.9″ x 2.6″ x 0.9″ (161 x 69 x 32 mm)
Weight0.7 lbs (300g)

Ultrasonic Thickness Gauge with Thru Coating Capabilities

5-Year Warranty! Phase II state of the art, digital tester is capable of reading wall thickness thru coatings and paintwithout affecting the measurement and is packed with the most popular features including basic measurement, Scanning Capabilities, Adjustable Sound Velocity, extended memory and RS 232 output capabilities. This dynamic sonic gauge is designed to measure the thickness of metallic and nonmetallic materials such as steel, aluminum, titanium, plastics, ceramics, glass and any other good ultrasonic wave conductor as long as it has parallel top and bottom surfaces. The UTG-2600 will accurately display readings in either inch or millimeter after a simple calibration to a known thickness or sound velocity.

UTG-2600 comes complete with Certificate of Calibration, Operation Manual and Custom Carry Case.

Display Type4-digit LCD w/back light
Minimum display unit0.003 (if>3.93″) 0.000.”(if<3.93″)
Measuring RangeStandard Mode: 0.03-8.0″ in steel. Thru coating mode: 0.118″ – .905″ 3.0 – 23mm) w/standard probe
Accuracy /- 1%xH 0.0007″ (H=displayed value)
Sound Velocity Range3280-32805 ft/s ( 1000-9999 m/s )
Upper/Lower Limit Preset AlarmYes
Operating Temperature32-122 degrees F
Frequency4MHz
Update Range4Hz
Memory500 Test Values
OutputRS 232
Power Supply3v AA alkaline batteries (2pc)
Battery LifeApprox. 100 hours (w/backlight off)
Power ConsumptionWorking current is less than 3V
Dimensions5.86″ x 2.87″ x 1.25″ (149 x 73 x 32 mm)
Weight5.6 oz (160 kg)

Ultrasonic Thickness Gauge with Scan Feature

5-Year Warranty! Phase II state of the art, digital tester is packed with features typically found on high end models only. This multi-functional unit offers everything from basic measurement, Scanning Capabilities, Adjustable Sound Velocity, extended memory and USB output capabilities. This dynamic sonic gauge is designed to measure the thickness of metallic and non-metallic materials such as steel, aluminum, titanium, plastics, ceramics, glass and any other good ultrasonic wave conductor as long as it has parallel top and bottom surfaces. This is our most popular model; loaded with features!

The UTG-2800 will accurately display readings in either inch or millimeter after a simple calibration to a known thickness or sound velocity.

Display Type3-digit LCD
Minimum display unit0.001″ / 0.01 mm (selectable0
Measuring Range0.02 – 12.0″ in steel w/standard probe
Accuracy /- (0.5% thickness .001″)
Sound Velocity Range3280-32805 ft/s ( 1000-9999 m/s )
Upper/Lower Limit Preset AlarmYes
Operating Temperature32-122 degrees F
Frequency5MHz
Update Range4Hz
Memory20 groups (100 files/group)
OutputRS 232
Mini-Printeroptional
Power Supply3v AA alkaline batteries (2pc)
Battery LifeApprox. 100 hours (w/backlight off)
Power ConsumptionWorking current is less than 3V
Dimensions5.9″ x 2.91″ x 1.3″ (150 x 74 x 33 mm)
Weight8.6 oz (245 kg)
Ultrasonic Thickness Gauge

Ultrasonic Thickness Gauge, With Thru Coating Capabilities, With Scan Feature

Reviews

There are no reviews yet.

Be the first to review “Ultrasonic Thickness Gauges”

Your email address will not be published. Required fields are marked