Twenty two replicated machined surface finishes with examples of six different machining processes: lapped, ground, blanchard ground, shape-turned, milled and profiled – ranging from 2 to 500 microinches.

Place the S-22 MICROFINISH COMPARATOR Surface Roughness Scale alongside your work piece. Slide the scale so that the rectangle with the surface roughness you want is adjacent to the piece you are examining. Compare by drawing the tip of the fingernail across each surface at right angles to the tool mark. The feel of the fingernail contact must be the same if the finishes are identical.

The S-22 MICROFINISH COMPARATOR Surface Roughness Scale is made by a dual electroforming process wherein nickel is electrodeposited to provide an exact reproduction in intricate detail.

The surfaces used in this scale are reproductions of accurately machined surfaces measured in microinches (millions of an inch – 0.000001″). The numbers engraved alongside each surface are the average deviation from the mean surface expressed in microinches.

The S-22 MICROFINISH COMPARATOR Surface Roughness Scale provides industry with established flat surface roughness specimens for visual and tactual comparison. It is used in specifying and controlling surface roughness when a product having the appearance of typically machined surfaces required. The S-22?provides an economical tool which permits roughness to be specified on the same basis as linear measurements. The surfaces presented are the result of years of research and engineering. Details covering this subject are now published in The American National Standards Institute (ANSI) specification titled: “Surface Texture, Surface Roughness, Waviness and Lay.” ANSI/ASME B46.1

The S-22 Conventional Machining MICROFINISH COMPARATOR is rectangular in shape (2″ x 5 3/8″) and is a corrosion resistant electroformed nickel duplicate of actual machined surfaces.turned,? milled and profiled – ranging from 2 to 500 microinches.

Made in U.S.A S-22 MICROFINISH COMPARATOR is supplied in a leatherette case with engineering data and instructions.

The S-22 is also available in metric with micrometer designations.

WeightN/A
Conversions

English, Metric

Reviews

There are no reviews yet.

Be the first to review “Conventional Machining Microfinish Comparator”

Your email address will not be published. Required fields are marked